If you want the reflective vest to exert its effect, you must pay attention to the correct use and clean it. This is also very important.
For the reflective vest, try to wash it by hand. Don't put it in the washing machine and wash it at the same time as other clothing, so as not to damage its reflective effect. When cleaning, you can soak in warm water. The reflective tape should avoid gravity scrubbing, and it should not be exposed to the sun. Try to avoid excessive folding of the reflective tape during storage, which can extend the life of the vest. The reflective strips on the vest should not be rubbed with too much force, otherwise the reflective glass beads will easily fall off, until there is no reflective effect.
When cleaning the reflective vest, you can also choose to wipe gently with water and cloth, but not too hard. Only by maintaining the correct cleaning method can the life of the vest be prolonged and its reflective protection effect can be maintained strong.
Before washing the sanitation work clothes, check the wear and damage of the work clothes, and repair or replace them as needed. If the work clothes are exposed to toxic and harmful drugs, they must be properly handled before washing to ensure safety. Work clothes of different cleanliness levels should be washed separately, and drying and packaging should be carried out in a clean environment. Work clothes that need to be sterilized after drying should be put into a sterilization bag one by one, and sterilized collectively. The storage time after sterilization should be specified; non-sterile clothing should be properly stored after drying to prevent contamination.
Pay attention to the cleanliness of the sanitation work clothes storage room, which is consistent with the air cleanliness of the clean room where the work clothes are used. Check whether it meets the requirements before use. If contamination or damage is found, it should be reported and replaced in time.